The post Tial F38 .8 Bar 38mm Performance Wastegate appeared first on 944 Store.
]]>Features:
High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs
High temperature silicone Nomex reinforced actuator diaphragm
17-7 PH Stainless Steel actuator spring gives consistent pressure at high temps, resist ”relaxing” at temperature to 900°F (483°C)
Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing
All Stainless Steel hardware
Inlet Flange: 1.50” OD; Outlet Flange: 1.50” OD
2.80” center-to-center bolt hole flange
Mating weld flanges included
Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black)
Included with Every Tial F38 Series Wastegate:
F38 Wastegate Assembly
F38 Valve Seat
Two TiAL Air Fittings
Two Mounting Bolts
The TiAL F38 Wastegate spring base pressures range from 3.626 to 23.206 psi (0.25 to 1.6 BAR). All TiAL wastegates are designed to optimize actuator-to-valve area ratio to provide maximum control and a wide dynamic flow capacity.
The post Tial F38 .8 Bar 38mm Performance Wastegate appeared first on 944 Store.
]]>The post 10′ High Temp Reinforced Silicone Tubing appeared first on 944 Store.
]]>Replace your old stock OEM hose with these silicone hoses which are resistant to coolant solutions, cold leaks, cracking, peeling, aging and ozone.
The 944/951 use three sizes for vacuum (3mm, 6mm and 8mm inside diameter)
Make sure to purchase both all three types if planning on upgrading all vacuum lines in your 944!
The post 10′ High Temp Reinforced Silicone Tubing appeared first on 944 Store.
]]>