The post OEM 944-347-333-07 Tie Rod 94434733307 appeared first on 944 Store.
]]>The post OEM 944-347-333-07 Tie Rod 94434733307 appeared first on 944 Store.
]]>The post Koni Insert for Sachs 94434303219 Sealed Strut appeared first on 944 Store.
]]>End result is an adjustable (firmness) and serviceable (replaceable inserts) front strut solution for your Porsche 944.
Here is the installation video:
The post Koni Insert for Sachs 94434303219 Sealed Strut appeared first on 944 Store.
]]>The post OEM 113415511 477419059 Lower Steering Assembly appeared first on 944 Store.
]]>Part Number: PCG-515-511, PCG.515.511, PCG515511, PCG 515 511
The post OEM 113415511 477419059 Lower Steering Assembly appeared first on 944 Store.
]]>The post Aftermarket 94434733301 Ball Joint appeared first on 944 Store.
]]>The post Aftermarket 94434733301 Ball Joint appeared first on 944 Store.
]]>The post Sway Bar Drop Link Bushings appeared first on 944 Store.
]]>This item fits:
Porsche 944 cars with aluminum control arms.
(Porsche 944 from 1985.5, 944 Turbo, 944S, 944S2, 968)
1 Set Per Car
The post Sway Bar Drop Link Bushings appeared first on 944 Store.
]]>The post 944 Ball Joint Kit – Solid Bushing appeared first on 944 Store.
]]>With our kit you can easily replace the aluminum control arm ball joints with units that are better than what the car was delivered with. No special tools required and no machine work is necessary.
The Rennbay ball joint kit incorporates solid aluminum bronze internal bushings, forged chromoly ball pins and new lower plates with grease fittings. One kit will replace the ball joints on both control arms.
This kit fits:
Porsche 944 models with Aluminum front control arms
(944 from 1985.5, 944 Turbo, 944S, 944S2)
The post 944 Ball Joint Kit – Solid Bushing appeared first on 944 Store.
]]>The post Porsche 944 Sway Bar Braces appeared first on 944 Store.
]]>Our braces bolt between the stock brackets and the cross member to eliminate this flex effect and will give your car back its level stance during cornering. This is a great addition if you have stock sway bars but if you are upgrading to a M030 (30mm) unit it is a necessary modification to get the full effect.
These braces bolt on using the existing hardware. Taking only a few minutes to install on the 944, you can eliminate the sway bar bracket flex and you can start to feel your car’s level stance again, in even the hardest corners.
These item fits:
Porsche 944, 944 Turbo, 944S, 944S2, 924S, 968
sold per pair
The post Porsche 944 Sway Bar Braces appeared first on 944 Store.
]]>The post OEM 477419059 Lower Steering Needle Roller Bearing appeared first on 944 Store.
]]>Part Numbers: 113415511, 113-415-511, 113.415.511, 113 415 511, PCG415511, PCG-415-511, PCG.415.511, PCG 415 511
The post OEM 477419059 Lower Steering Needle Roller Bearing appeared first on 944 Store.
]]>The post Refurbished Porsche 171412135 Strut Cover Boot appeared first on 944 Store.
]]>Item 14 on diagram 1
Item 6 on diagram 2
The post Refurbished Porsche 171412135 Strut Cover Boot appeared first on 944 Store.
]]>The post 94434307100 Upper Front Strut Mount 1982-1986 appeared first on 944 Store.
]]>The post 94434307100 Upper Front Strut Mount 1982-1986 appeared first on 944 Store.
]]>